The script view

The script view

Key:

  • 1. The “Script” view tab.
  • 2. The “Script” view toolbar.
  • 3. The script input zone.
  • 4. The script output zone.

Main script view commands

  • Run a script [3] : Runs the script entered in the script input zone and displays the result in the script output zone.

  • Clear the output zone [4] : Clear the entire contents of the script view output zone.

  • Load a script [5] : Loads an existing script.

  • Load and run a script [6] : Loads an existing script and automatically runs it.

  • Save a script [7] : Saves the script entered in the script input zone.

  • Activate script debug mode [8] : Activates the script debug mode. In this mode, the script input zone is not cleared when a script is run.

Note: For more information, see “Scripts and macros”.

ScriptTab.png (26.9 KB) admin admin, 12 June 2012 16:25

save_as_macro.gif (999 Bytes) admin admin, 12 June 2012 16:25

run_script.gif (892 Bytes) admin admin, 12 June 2012 16:25

script_debug.gif (1006 Bytes) admin admin, 12 June 2012 16:25

open_run_script.gif (932 Bytes) admin admin, 12 June 2012 16:25

script_clear_output.gif (895 Bytes) admin admin, 12 June 2012 16:25

open_script.gif (916 Bytes) admin admin, 12 June 2012 16:25