The UML wizard view (on operations only)

The UML wizard view

Note: The UML wizard view is only available on operations.

Main UML wizard view commands

  • Edit operation properties [Left-click in the field of your choice in the “Operation properties” zone] : Activates the field in question, enabling you to edit the properties of the selected operation.

  • Add/Remove a parameter [4] : Adds a new parameter in the display table, enabling you to directly edit its properties.

  • Edit a parameter [Left-click in the field of your choice in the display table] : Activates the field in question, enabling you to edit the properties of the selected parameter.

  • Remove a parameter [5] : Removes the selected parameter from the operation.

  • Edit a return parameter [Left-click in the field of your choice in the display table] : Activates the field in question, enabling you to edit the properties of the selected return parameter.

  • Move a parameter or return parameter inside the parameter display table [6 and 7] : Moves the selected parameter or return parameter up or down a line in the display table.

free_fig27.gif (29.6 KB) admin admin, 12 June 2012 16:20

add_param.gif (1000 Bytes) admin admin, 12 June 2012 16:20

del_tv_ster.gif (854 Bytes) admin admin, 12 June 2012 16:20

param_down.gif (1.01 KB) admin admin, 12 June 2012 16:20

mouse_left_red.gif (879 Bytes) admin admin, 12 June 2012 16:20

param_up.gif (1.01 KB) admin admin, 12 June 2012 16:20