Aligning elements

Aligning elements

Modelio diagrams provide several different alignment possibilities. To align elements in a diagram, just select the elements you want to align and click on the desired icon in the diagram toolbar:

  • 2 Align top: This aligns selected elements with the top of the element selected first.

  • 3 Align left: This aligns selected elements with the left-hand side of the element selected first.

  • 4 Align bottom: This aligns selected elements with the bottom of the element selected first.

  • 5 Align right: This aligns selected elements with the right-hand side of the element selected first.

  • 6 Align center: This horizontally aligns selected elements with the center point of the element selected first.

  • 7 Align middle: This vertically aligns selected elements with the center point of the element selected first.

  • 8 Set to the same height: This sets selected elements to the same height as the element selected first.

  • 9 Set to the same width: This sets selected elements to the same width as the element selected first.

  • 10 Set to the same size: This sets selected elements to the same size as the element selected first.

align_center_h.png (286 Bytes) admin admin, 03 December 2013 17:04

align_center_v.png (279 Bytes) admin admin, 03 December 2013 17:04

align_top.png (276 Bytes) admin admin, 03 December 2013 17:04

align_left.png (277 Bytes) admin admin, 03 December 2013 17:04

same_width.png (338 Bytes) admin admin, 03 December 2013 17:04

align_right.png (285 Bytes) admin admin, 03 December 2013 17:04

same_height.png (329 Bytes) admin admin, 03 December 2013 17:04

align_bottom.png (270 Bytes) admin admin, 03 December 2013 17:04

same_size.png (337 Bytes) admin admin, 03 December 2013 17:04