The script view

The script view

Key:

  • 1. The “Script” view tab.
  • 2. The “Script” view toolbar.
  • 3. The script input zone.
  • 4. The script output zone.

Main script view commands

  • Open Macros catalog [10] : Opens the Macros catalog.

  • Load a script [5] : Loads an existing script.

  • Load and run a script [6] : Loads an existing script and automatically runs it.

  • Save a script [7] : Saves the script entered in the script input zone.

  • Clear the output zone [4] : Clears the entire contents of the script view output zone.

  • Activate script debug mode [8] : Activates the script debug mode. In this mode, the script input zone is not cleared when a script is run.

  • Run a script [3] : Runs the script entered in the script input zone and displays the result in the script output zone.

Note: For more information, see “Scripts and macros”.

debugmode_16.png (3.55 KB) admin admin, 03 December 2013 17:09

go_16.png (888 Bytes) admin admin, 03 December 2013 17:09

loadfile_16.png (775 Bytes) admin admin, 03 December 2013 17:09

scriptcatalog.png (874 Bytes) admin admin, 03 December 2013 17:09

scriptview_16.png (874 Bytes) admin admin, 03 December 2013 17:09

clearoutput_16.png (290 Bytes) admin admin, 03 December 2013 17:09

runfile_16.png (495 Bytes) admin admin, 03 December 2013 17:09

save_16.png (978 Bytes) admin admin, 03 December 2013 17:09

ScriptTab.png (24.1 KB) admin admin, 03 December 2013 17:09