Activity

From 10 October 2013 to 08 November 2013

08 November 2013

18:14 Issue #152 (Rejected): "Ghost" elements left on diagram when deleting elements when that diagram ...
1. Open some diagram
2. Add a class to it
3. Close diagram
4. Delete class
5. Open diagram
You'll see a gray b...
WGH WGH
17:46 Issue #151: Use case relationships sometimes cannot be added
OK, I have a reproduction. Sequence of actions looks odd, it is probably redundant, but it works. I can assure you th... WGH WGH
17:30 Issue #151 (Closed): Use case relationships sometimes cannot be added
Sometimes when you add inclusion/extension relationship between use cases, it doesn't work. Modelio displays the foll... WGH WGH

07 November 2013

11:26 Issue #150: (BPMN) Message flow inside a pool is not detected by Audit as wrong
Thanks, that sounds even better. I tried this several times on a plain Diagram, as in the image attached to the issue... Johannes Bumüller
11:09 Issue #150: (BPMN) Message flow inside a pool is not detected by Audit as wrong
Normally it is not possible to create a message flow betweens 2 element in the same pool.
This would be fixed by des...
Antonin Abhervé
10:42 Issue #150 (Assigned): (BPMN) Message flow inside a pool is not detected by Audit as wrong
Etienne Brosse
10:27 Issue #150 (Closed): (BPMN) Message flow inside a pool is not detected by Audit as wrong
I noticed, if I create a BPMN-Chart, with a single Pool and create a Message Flow inside it (see Diageam view image),... Johannes Bumüller

06 November 2013

10:55 Modelio 3.0.1 released!
New features:
- New 'Select all/deselect all' buttons in the Modules update window.
- New progress bar when addin...
Christophe Demeulemeester

03 November 2013

15:07 Issue #148 (Closed): Can't drag borders of labels
Such error is raised in many cases, I'll just provide a single one:
* Create a State Machine diagram
* Add two st...
WGH WGH
14:43 Issue #147 (Assigned): Nested classes and class diagram
Consider the following structure:
ClassA
|-- ClassB
|-- ClassC
|-- ClassA Class Diagram
Diagra...
WGH WGH

30 October 2013

17:48 Issue #144 (Closed): Quick reference selection mode isn't always aborted when input loses focus
Validated with Modelio 3.0.01 – 201310301434 - 64-bit on Windows Seven SP1 64-bit. Christophe Demeulemeester
17:46 Issue #142 (Closed): When a duplicate class is added to a class diagram, there's no indication wh...
Validated with Modelio 3.0.01 – 201310301434 - 64-bit on Windows Seven SP1 64-bit. Christophe Demeulemeester
15:13 Issue #143 (Closed): Diagram style editor - some entries are repeated twice
Validated with Modelio 3.0.01 – 201310301120 - 64-bit on Windows Seven SP1 64-bit. Christophe Demeulemeester
15:07 Issue #131 (Closed): Impossible de créer une classe d'association sur une association n-aire en v...
Validated with Modelio 3.0.01 – 201310301120 - 64-bit on Windows Seven SP1 64-bit. Christophe Demeulemeester

28 October 2013

15:00 Modeler Module ModelerModule_8.1.18.jmdac
Christophe Demeulemeester

25 October 2013

15:30 Assistance #146 (New): Inclusion d'un projet modelio dans un autre projet source et projet versionné
Nous utilisons actuellement ArgoUML pour gérer notre modèle de données et sa génération.
Le projet est commité, et e...
Eric Chatellier
15:15 Evolution #145 (Assigned): Add 'Export XMI' link on project (instead of first package)
In current version, all project can't be exported as XMI, only first package can, but first package is not present
i...
Eric Chatellier

22 October 2013

17:58 Issue #141: It's not possible to specify minint and maxint in CombinedFragment loop operand
If I undestand that correctly, this means all associated values of the InteractionConstraint - among other things, *s... WGH WGH
15:50 Issue #141: It's not possible to specify minint and maxint in CombinedFragment loop operand
##### Modelio metamodel:
In UML *`minint`* and *`maxint`* are specified as an *InteractionConstraint* guard on the *...
Cédric Marin
14:44 Issue #143 (Resolved): Diagram style editor - some entries are repeated twice
Christophe Malgouyres
14:43 Issue #143 (Assigned): Diagram style editor - some entries are repeated twice
Hi WGH WGH,
again, thank you for your feedback.
The duplicated entries came from the "N-ary" versions of Associ...
Christophe Malgouyres
14:17 Issue #142 (Resolved): When a duplicate class is added to a class diagram, there's no indication ...
Hi WGH WGH,
first of all, thank you for your detailled feedback.
WGH WGH wrote:
> Another option I can think o...
Christophe Malgouyres
12:47 Issue #144 (Resolved): Quick reference selection mode isn't always aborted when input loses focus
Philippe Vlaemynck
11:56 Issue #144: Quick reference selection mode isn't always aborted when input loses focus
To WGH WGH: Thank you for you accurate description of this bug which helped us a lot to fix it. The feature you call ... admin admin

21 October 2013

20:22 Issue #144 (Closed): Quick reference selection mode isn't always aborted when input loses focus
The subject might be vague, as I don't know how this feature is properly called.
Anyway, this bug manifests everyw...
WGH WGH
18:11 Issue #143 (Closed): Diagram style editor - some entries are repeated twice
In diagram style editor, some options are listed twice. Take a look at the screenshot: you can find two "Show cardina... WGH WGH

20 October 2013

19:07 Issue #142 (Closed): When a duplicate class is added to a class diagram, there's no indication wh...
It makes sense that class diagrams don't contain duplicate classes.
However, when you drag'n'drop such class to a...
WGH WGH
17:39 Issue #141 (Closed): It's not possible to specify minint and maxint in CombinedFragment loop operand
...or at least the way to do so particularly unobvious. There's no such option in Element tab, where I'd expect it to... WGH WGH

18 October 2013

15:32 Issue #140: No save confirmation on exit
Even though I managed to capture a [video of this](http://chireiden.torlan.ru/modelio_close.avi), I couldn't find abs... WGH WGH
13:59 Issue #140: No save confirmation on exit
Small update: even after selecting "File -> Quit" and clicking "Cancel" there, closing window may close the applicati... WGH WGH
12:49 Issue #140: No save confirmation on exit
I tried two different platforms. Modelio build number is the one you specified.
1. Windows 7 64-bit running 64-bi...
WGH WGH
11:11 Issue #140: No save confirmation on exit
Not reproduced with Modelio 3.0.0 Open Source 201309241706 under Windows Seven SP1 64-bit.
@WGH WGH : Can you provid...
Christophe Demeulemeester

17 October 2013

21:03 Issue #140 (Assigned): No save confirmation on exit
Steps to reproduce:
1. Open some project
2. Make some changes
3. Close Modelio
Changes will be lost. Although...
WGH WGH

10 October 2013

16:53 Modeler Module Revision 33: Disable UpdateInternalStructure command for ModuleComponent.
Etienne Brosse
 

Also available in: Atom